Atención al cliente:
684 488 927
Eng
 Mi carrito 0 prod.
Oliomio Tecnotem

Oliomio Tecnotem

Installation for cold oil extraction by centrifugation. Ideal for producers who want to process olives immediately after harvesting to obtain high-quality extra virgin oil. It is a piece of equipment designed for small and medium-sized productions that provides a high degree of flexibility when carrying out the oil extraction process. It is made up of the pressing system, the mixing and decanting system. Oliomio Tecnotem allows processing between 500 kg and 4000 kg of olives per hour, depending on the option chosen.

Si necesita más información sobre este producto, rellene el siguiente formulario y contactaremos con usted. Gracias.

There are different configuration possibilities for the Oliomio Tecnotem equipment depending on the space available for its location and the existing production needs. Thus allowing olive processing of 500 kg, 750 kg, 1000 kg, 1500 kg, 2000 kg, 3000 kg and 4000 kg per hour, depending on the option chosen. Depending on the contingencies, you can opt for a single production line or two lines in parallel with a shared mill.

  • The equipment is made up of the pressing system, the mixing and decanting system.
  • The mill is equipped with knives with a 350 mm diameter sieve grid and 6.5 mm diameter holes with a polisher.
  • The mill is mounted on a frame with a pump that feeds the mixers.
  • The mixers are horizontal and closed with one pump per mixer.
  • The heating chamber has a circulator and valves for external management.
  • The paste input pumps from the decanter have a speed variator.
  • Container flowmeter for dosing water extraction.
  • It has a two-outlet decanter with a 2.0 worm screw.
  • The electrical panel is equipped with thermal protection and made to work continuously and discontinuously with stainless steel cables and channels for various connections.
  • You can control the temperature of the mill paste, the mixers at the inlet of the paste from the decanter and also at the outlet of the oil from the decanter.
  • The standard voltage of electric motors is 380V, 50 Hz.

The Tecnotem installation has been designed to carry out custom or personalized commercial work in a continuous or discontinuous cycle. The management of oxygen at the mill entrance characterizes the production and constitutes a very important factor that allows the formation of lipoxygenase. Beating is done in closed mixers to prevent oxidation in the paste and ensure effective temperature control. The inlet of the paste is managed by a solenoid valve and the outlet is carried out by means of a PSS model elliptical piston pump mounted on each mixer. The horizontal decanter that separates the liquid from the solid has been designed to obtain the highest possible performance with the highest quality; The 2.0 worm screw has been made to obtain the cleanest product possible without adding water; there is no temperature increase during extraction. In conclusion, it can be stated that the Tecnotem facilities allow the extraction of a great product, in all phases of production, that makes the difference.